[. . . ] 9 Mono/stereo setting; Menu; Adjust tone/EQ; Set the clock; Turn off the display. For example, do not use near a bathtub, in a wet basement, near a swimming pool, and the like. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] a “T” will show on the display to indicate manual tuning mode. The display will show “ ” when auto scanning in FM and “ ” when auto scanning in AM. MENU/SELECT: Press to enter the main menu and press to select items within the menu. Some of the menu items can be accessed regardless of whether the Model 10 is on or off. The display will show “M” for mono or “ST” for stereo. €Mono” or “Stereo” will also be one of the fields shown when pressing the Info button on the remote. Use the   buttons to navigate through the menu pages and the pq buttons to change the items within the menu. Treble: Use pq to adjust the treble and press Select to proceed to the next menu item. Bass: Use pq to adjust the bass and press Select to proceed to the next menu item. Balance: As the balance control has no effect when the Model 10 is set to Mono, this setting should remain in the center position, except when the optional Model 10 Speaker is connected and Stereo mode is selected via the remote control’s “Mono” button. Though we still recommend the center balance setting in Stereo mode, you may use the pq buttons to adjust the balance to your liking, and press the Select button. Use pq to select between having the EQ on, having the EQ always off, or the EQ off until the Model 10 is turned off (when it is turned on again the EQ will be on again). Display off: Use the pq and Select buttons to set the display on or off. Setting the display off will turn the backlight off when the Model 10 is turned off. While the display is off, pressing a button on the remote will turn the display on for 10 seconds. Repeat this process to set/ change the minutes, then press Select to proceed to the next menu item. Use pq to set the year and press Select to proceed to the next menu item. Snooze: To activate Snooze while the alarm is sounding, press the Snooze button on the remote, or briefly press the Multi-Function Control Wheel on top of the unit. 11 English FM/AM Reception: The included external FM antenna will provide good reception. In strong FM signal locations, reducing the antenna’s length may provide better reception. Another alternative is to use an optional FM dipole antenna, though an adapter might be required. Connecting your cable television’s 75ohm coaxial cable to the external FM connection may also provide clear local reception, although you must usually request activation of this service through your cable company. [. . . ] Tivoli Audio reserves the right to make product changes without notice. Tivoli Audio, the Tivoli Audio logo, the Model 10, and the Model 10 Speaker are trademarks of Tivoli Audio, LLC. Utilisez pq pour sélectionner EQ on (toujours en fonction), EQ off (supprimé lorsqu’il est sélectionné, puis remis en fonction lorsque le Model 10 est éteint et rallumé) ou EQ always off (toujours supprimé). ADVARSEL: Pass på å holde produktet unna regn og fuktighet for å forebygge faren for brann eller elektrisk støt. [. . . ]